Your power‑saving system
Intelligent HVAC optimization for office buildings
Flunery combines smart sensors, a cloud platform and AI to find faults and energy waste in a building's air conditioning as they happen, and to cut its electricity costs.
Energy waste you can't see
40–60%of the energy used in office buildings goes to heating, ventilation and air conditioning.
HVAC is the largest energy user in most office buildings, and much of what it wastes goes unnoticed. This continuous, hidden waste is known as energy leakage.
- Small faults and wrong calibration waste energy continuously, and are hard to find by hand
- Inefficient operation wastes resources
- Employee comfort and productivity suffer
- There is no real-time view of the systems, and no real-time control
One system: hardware, software and AI
Flunery brings three layers together into a single management system for a building’s HVAC.
Hardware
P-Node sensors
A network of smart sensors at end points and central units collects data from every zone of the building.
Software
Flunery Cloud
A cloud platform brings the data together, with a management dashboard and real-time alerts.
AI
Optimization
Algorithms learn the building’s patterns, detect anomalies and warn of faults before they become expensive.
How it works
Installation needs no changes to the building. From then on, the system watches the HVAC continuously.
Install the sensors
P-Node sensors go in at end points and central units, with no changes to the building’s infrastructure.
Collect the data
Temperature, humidity and occupancy readings are sent securely to Flunery Cloud.
Learn and detect
The AI learns how the building behaves, spots anomalies, and forecasts cooling and heating loads from weather forecasts and work patterns.
Alert and adjust
Faults and energy waste trigger real-time alerts, and cooling and heating are adjusted automatically.
Flunery in 30 seconds
A short film showing Flunery at work in an office building.
Products
The hardware and software that make up the Flunery system.
FL001 smart thermostat
A cloud-connected thermostat, controlled from smartphones and from SaaS control units.
- Fully connected to Flunery Cloud
- Easy-to-use touch interface
- Controls cooling and heating automatically, according to need
P-Node sensors
Smart sensors installed at end points and central units, collecting data from every zone of the building.
- Measure temperature, humidity and occupancy
- Simple installation, with no changes to the building’s infrastructure
- Secure data transmission to the cloud
Flunery Cloud
The cloud platform behind the system, where the AI runs and where your team sees the building.
- AI algorithms that detect anomalies
- Cooling and heating load forecasts, from weather forecasts and work patterns
- A management dashboard with real-time alerts
Prevent faults instead of repairing them
When the system finds a fault or wasted energy, it alerts you in real time.
- Continuous monitoring of the system’s components
- Early detection of failures, before they become breakdowns
- Automatic alerts to the maintenance team
- Simpler maintenance of central and individual HVAC systems
What it changes for the building
Lower energy costs
Savings of tens of percent on the building’s electricity costs.
A smaller carbon footprint
Less wasted energy means lower emissions.
Better comfort
Better thermal comfort and wellbeing for the people who work in the building.
Full visibility
A clear, real-time picture of how the building’s systems are performing.
Ready to optimize your building?
Tell us about your building and how its HVAC is run today, and we will get back to you.
- info@flunery.com
- Phone
- +972 50 577 2333
+972 77 200 3406 (office) - Message us on WhatsApp
- Office
- 10 Bazel St
Petah Tikva, Israel